MONO 013 cable carrier MONO Series

The MONO 013 has an inner height of 10 mm and an outer height of 12.5 mm. It is available in 4 fixed inner widths: 6 / 10 / 15 / 20 mm. The outer width is the inner width plus 6 mm, so 12 to 26 mm. The pitch is 13 mm and there are 3 bending radii (KR): 20 / 28 / 37 mm.

The installation height (H) follows from the radius: with KR 20 mm it is 52.5 mm, with KR 37 mm it is 86.5 mm. Choose at least the radius your thickest cable requires; you will find it in the cable's datasheet. The thickest cable or hose may be 8 mm. For the inner height, calculate with the cable diameter plus 10% clearance.

By inner height, the MONO 013 is the smallest of the 3 types in the series. One size up is the MONO 0202: 11 mm inner height (1 mm more), for cables up to 8.5 mm. The longest travel length in this series is achieved by the MONO 0202 (70 m); the MONO 013 goes up to 40 m.

Self-supporting, with the upper run free above the lower run, the MONO 013 reaches up to 1.15 m travel length, 10 m/s and 50 m/s². For longer strokes it runs gliding, with the upper run on the lower run in a guide channel: up to 40 m travel length, 3 m/s and 30 m/s².

The weight of cables and hoses (additional load) may be up to 0.5 kg/m in a self-supporting arrangement, according to the load diagram in the catalogue. Vertical installation, hanging or standing, is also possible. Lying on its side is also possible. A rotating arrangement is not possible.

Depending on the version, you open the MONO 013 on the inside or outside radius, or it cannot be opened.

End connectors for the MONO 013 are available with the fastening facing outwards (A) or inwards (I). You can add strain relief (comb or C-rail) to the end connectors.

According to the type data, the MONO 013 can be used indoors and outdoors. Dirty environments are not a problem either. The type data also lists environments with chips. Heavy-duty and marine applications are listed as well.

For small applications with thin cables we recommend the MONO; the MONO 013 takes cables up to 8 mm. Wisman Techniek supplies the MONO 013 cut to length and, if required, complete with cables, assembled in Ruurlo.