PartsMy WismanTCall
Dress pack for Cloos-robots

Dress pack for the Cloos QIROX QRC

Choose your version and configure the dress pack: protective hose, clamps, holders and retraction system, with a parts list per axis. Our robotics division checks the package against your robot.

The Cloos QIROX QRC has 4 versions in the configurator, from the QIROX QRC-290 with 4 kg to the QIROX QRC-350 with 15 kg payload.

Open the configurator Prefer direct advice
CloosQIROX QRC
Versions
4
Payload
4–15 kg
Reach
1.711 mm
Hose size (advice)
Ø 36 / Ø 52 mm

About this robot

A dress pack on the Cloos QIROX QRC

(01) The robot

De QIROX QRC-robots van Cloos zijn lasrobots met 6 assen en een klassieke pols. Er zijn vier maten: de QRC-290, QRC-320, QRC-350 en QRC-410. Het werkbereik loopt van 2.900 tot 4.100 mm. De QRC-350 draagt 15 kg met een bereik van 1.711 mm, de QRC-410 10 kg. Elke maat is er ook met een hoge voet (-H) en als -E met een zevende as.

(02) What this means for your dress pack

Bij een klassieke pols loopt het slangpakket niet door de arm maar buitenom. Cloos noemt een flexibele slanggeleiding als onderdeel van de lasuitrusting. Toortspakket, gasslang en eventuele sensorkabels hebben dan bescherming nodig tegen schuren en spatten, en geleiding zodat ze niet tegen de opspanning of de positioneerder slaan. Het slangadvies is Ø 36 mm, bij de QRC-350 Ø 52 mm.

(03) In practice

Werk je met een zevende as of een positioneerder, dan beweegt het werkstuk mee. Test het pakket dan in de uiterste standen van de hele cel, niet alleen van de robot.

Versions

Choose your version

Each model opens the configurator with your robot already selected. Payload and reach according to the manufacturer's data.

ModelPayloadConfigure
QIROX QRC-320Welding–Configure
QIROX QRC-290Welding4 kgConfigure
QIROX QRC-410Welding10 kgConfigure
QIROX QRC-350Welding15 kgConfigure

Not in the list?

Is your version not listed? In the configurator you enter the model yourself. Look for the type on the nameplate or in the robot's manual.

In this series

Payload 4, 10 en 15 kg. Reach 1,711 mm.

According to the manufacturer

What the QIROX QRC asks of the dress pack

Data from the manufacturer's documentation, and what it means for the hose, the clamps and the retraction system on this robot.

Axes
6
Hollow wrist
No
Versions
QRC-290 (werkbereik 2.900 mm), QRC-320 (3.200 mm), QRC-350 (3.500 mm), QRC-410 (4.100 mm), -H: hoge voet voor vloermontage, -E: uitgebreid met een zevende as

Applications according to the manufacturer

  • welding

Source: manufacturer's documentation (cloos.de, cloos.hu). Always check the data for your own version.

Cables and hoses on the Cloos QIROX QRC

  • Klassieke pols: slangpakket buitenom; flexibele slanggeleiding als onderdeel van de lasuitrusting
  • QRC-350: 15 kg, bereik 1.711 mm
  • QRC-410: 10 kg
  • QRC-290: 4 kg
  1. (01)

    No hollow wrist: the package runs on the outside

    Bij de Cloos QIROX QRC lopen de leidingen voor het gereedschap buiten over de arm. Een compleet pakket van as 1 tot as 6, met een kogelgewricht bij de pols en een terugtreksysteem op de bovenarm, houdt de slang vrij van de robot en het werkstuk.

  2. (02)

    Welding: heat and spatter

    De Cloos QIROX QRC wordt ook ingezet voor lassen. Dan komen er spatten en warmte bij het gereedschap. Kies een slang die daartegen kan, of een hittebescherming over het laatste stuk van het pakket.

Dress pack configurator

Configure the dress pack for the QIROX QRC put together yourself

  1. 01

    Your robot is already waiting

    Choose your version; hose size, clamps and holders follow from the type.

  2. 02

    You see the package on the robot

    You see every choice reflected on the robot straight away. The parts list at the bottom calculates along.

  3. 03

    PDF with drawing and parts list

    Download your configuration with the drawing of your robot, your choices and the bill of materials.

  4. 04

    Checked by the robot division

    We calculate the configuration for your robot and tool and send a proposal with price.

Class Compact, recommended hose Ø 36 mm.

Start the configurator

Type not in the list? Enter the model yourself.

Hose size and parts

What goes on the QIROX QRC

The configurator classifies each version by payload. Per class the hose size, the solutions and the parts available in that size.

  • Compact

    Ø 36 mm

    3 versions from Cloos QIROX QRC fall into the Compact class (up to and including 12 kg) with 4–10 kg payload. For these the configurator suggests a protective hose of Ø 36 mm.

    QIROX QRC-320 · QIROX QRC-290 · QIROX QRC-410

    Solutions

    • Complete dress pack, axes 1–6
    • Upper arm, axes 3–6
    • Base, axes 1–3

    Available in Ø 36 mm

    Protective hose
    PARAB, PA 12, flexible · PURRB, PUR, extremely flexible · PARRB, PA 12, rigid · LPRRB, PA 12, conductive
    Swivel flange 360° (axis 1)
    Swivel flange 360°PADFB-42
    Clamp
    nylon closure · screw closurePASSB-36K, PASSB-36S
    Clamping jaws
    Clamp jaw set, holding
    Retraction system
    fixed guidePOFHB-36/36
    Retraction system spring
    Retraction system spring
    Ball joint (axis 4/5)
    Ball joint, clamp jawPAKGB-36
    Ball joint protection ring
    Ball joint protection ringPAPRB-36
    End fixing (axis 6)
    Tool end fixing

  • Medium

    Ø 52 mm

    The QIROX QRC-350 falls into the Medium class (more than 12 and less than 80 kg) with 15 kg payload. For it the configurator suggests a protective hose of Ø 52 mm.

    Solutions

    • Complete dress pack, axes 1–6
    • Upper arm, axes 3–6
    • Base, axes 1–3

    Available in Ø 52 mm

    Protective hose
    PARAB, PA 12, flexible · PURRB, PUR, extremely flexible · PARRB, PA 12, rigid · LPRRB, PA 12, conductive
    Swivel flange 360° (axis 1)
    Swivel flange 360°
    Clamp
    nylon closure · stainless steel closure · screw closurePASSB-52K, PASSB-52M
    Clamping jaws
    Clamp jaw set, holding
    Retraction system
    fixed guide · spherical ±12°PAFKB-52
    Retraction system spring
    Retraction system spring
    Ball joint (axis 4/5)
    Ball joint, clamp jawPAKGB-52
    Ball joint protection ring
    Ball joint protection ringPAPRB-52
    End fixing (axis 6)
    Tool end fixing

Cloos

Other series from Cloos

All Cloos-robots

Lighter: the QIROX QRH with 6 kg payload and hose advice Ø 36 mm.

In practice

Robot dress packs in practice

All projects
Dress pack with ball joints along the robot's forearm

Featured project

Complete dress pack for a robot at Mifa Aluminium in Venlo

For a robot at Mifa Aluminium in Venlo, the robotics division of Wisman Techniek supplied a complete dress pack so the robot keeps running reliably.

Customer
Mifa Aluminium
Location
Venlo
Sector
Robotics & logistics
Solution
Robotics
Cable package
Cables and hoses for the tool
Assembly
Complete dress pack by the robotics division of Wisman Techniek
Read the project

Frequently asked questions

Questions about a dress pack for this robot

Robot division

A dress pack that
fits your robot.

Send us your robot type and application. Our robot division puts the package together and checks it against your robot.

Useful reading

Request a quote
Call a specialist
Grego ErnstTieme ErnstOlaf OttenBas EgberinkDaan van Weeghel

11 specialists in Ruurlo
You speak directly to someone who knows.

CallQuoteAssemble