UA1320 cable carrier UNIFLEX Advanced Series

The UA1320 has an inner height of 20 mm and an outer height of 25.5 mm. It is available in 5 fixed inner widths: 15 / 25 / 38 / 50 / 65 mm. The outer width is the inner width plus 12 mm, so 27 to 77 mm. The pitch is 32 mm and there are 6 bending radii (KR): 28 / 38 / 48 / 75 / 100 / 125 mm.

The installation height (H) follows from the radius: with KR 28 mm it is 81.5 mm, with KR 125 mm it is 275.5 mm. Choose at least the radius your thickest cable requires; you will find it in the cable's datasheet. The thickest cable or hose may be 16 mm. For the inner height, calculate with the cable diameter plus 10% clearance.

By inner height, the UA1320 is number 2 of the 7 types in the series, from small to large. One size down is the UA1250: 17.5 mm inner height (2.5 mm less), for cables up to 14 mm. One size up is the UA1455: 26 mm inner height (6 mm more), for cables up to 20.5 mm. The longest travel length in this series is achieved by the UA1775 (200 m); the UA1320 goes up to 80 m.

Self-supporting, with the upper run free above the lower run, the UA1320 reaches up to 2.9 m travel length, 10 m/s and 50 m/s². For longer strokes it runs gliding, with the upper run on the lower run in a guide channel: up to 80 m travel length, 2.5 m/s and 25 m/s².

The weight of cables and hoses (additional load) may be up to 3 kg/m in a self-supporting arrangement, according to the load diagram in the catalogue. Vertical installation, hanging or standing, is also possible. Lying on its side is also possible. A rotating arrangement is possible.

Dividers of 2 mm separate the cables across the width; the smallest centre-to-centre distance is 8 mm. The UA1320 cannot be opened; the cables go in before installation.

End connectors for the UA1320 are available facing outwards (A) and inwards (I), and rotated 90° outwards (H) or inwards (K). You can add strain relief (comb or C-rail) to the end connectors.

According to the type data, the UA1320 can be used indoors and outdoors. Dirty environments are not a problem either. The type data also lists environments with chips. Heavy-duty and marine applications are listed as well.

The UNIFLEX Advanced is our all-round recommendation for plastic cable carriers. Within it, the UA1320 is the size for cables and hoses up to 16 mm. Wisman Techniek supplies the UA1320 cut to length and, if required, complete with cables, assembled in Ruurlo.