Carrier worn or broken?Find the replacement that fits.
Enter the dimensions of your current cable carrier, of any brand. You immediately see which types fit in the same place, and why for each dimension.
13 types fit in the same place
De 5 beste van 61 types
Beste match · Plastic · open
UA1455
UNIFLEX Advanced Series
Match 100%
- Hi
- 26
- Bi
- 38
- Pitch
- 45,5
- Inner height 26 mm → 26 mm: GelijkSame as your current carrier.
- Inner width 38 mm → 38 mm: GelijkStandard size, identical to your current carrier.
- Bending radius niet ingevuld → 52–200 mm: OnbekendWithout a radius we cannot compare the bend and the installation height.
Optie 2 · Plastic · closed
MT0475
MT Series
Match 100%
- Hi
- 26
- Bi
- 38 op maat
- Pitch
- 47,5
Optie 3 · Plastic · closed
TKA38
TKA Series
Match 100%
- Hi
- 26
- Bi
- 38
- Pitch
- 38,5
Optie 4 · Plastic · open
ET1455
EasyTrax® Series
Match 96%
- Hi
- 25
- Bi
- 38
- Pitch
- 45,5
Optie 5 · Plastic · open
M0475
M Series
Match 92%
- Hi
- 28
- Bi
- 38 op maat
- Pitch
- 47,5
Not sure? A specialist checks every choice, including the end fixings.
How it works
How the guide chooses
No guesswork and no brand comparison: only the dimensions from our type data, with fixed rules. Anything not in the data is shown as unknown and checked by a specialist.
Read: how to find a suitable typeInner dimensions at least equal
Inner height and inner width are at least what you measured (1 mm measuring margin), so your cables keep fitting. At most 50% larger (minimum 10 mm), otherwise the carrier no longer fits in the same place.
Same or slightly wider bend
The bending radius is no tighter than now (2 mm tolerance), because your cables were chosen for that bend. At most 15% larger (at least 10 mm), because a larger bend makes the carrier taller.
Travel length, installation and type
Your travel length falls within what the type can handle self-supporting or gliding. Hanging or standing only for types that may run vertically. Material and open or closed follow your choice.
Fits in the same space
Enter your outer height and outer width, and the replacement will not be larger than your current carrier (1 mm measuring margin).
Match in percent
The closer the height, width, radius, pitch and outer dimensions are to your current carrier, the higher the match. Only what you entered counts. A different pitch does not rule it out, but costs points: the length in links and the end mounting then differ.
Send a photo of your carrier or part
Don't know the type number? A photo of the carrier, the type plate or the broken part is often enough. We will find out what it is and let you know what we can supply.
Frequently asked questions
Questions about replacing
Contact
Prefer us to
find the replacement?
Send the type number or a photo of your current carrier. A specialist will find a type that fits in the same place.
- Phone+31 88 002 3500
- E-mailverkoop@wisman-techniek.nl
- AvailableMon–Fri 08:30–17:00
11 specialists in Ruurlo
You speak directly to someone who knows.