Dress pack for the Hyundai Robotics HDC
Choose your version and configure the dress pack: protective hose, clamps, holders and retraction system, with a parts list per axis. Our robotics division checks the package against your robot.
The Hyundai Robotics HDC has 3 versions in the configurator, from the HDC25-18 with 25 kg to the HDC50-17 with 50 kg payload.
- Versions
- 3
- Payload
- 25–50 kg
- Reach
- 1.700–1.880 mm
- Hose size (advice)
- Ø 29 mm
About this robot
A dress pack on the Hyundai Robotics HDC
(01) The robot
De HDC-serie zijn de cobots van Hyundai Robotics, maar dan voor zware lasten: de HDC25-18 voor 25 kg, de HDC35-18 voor 35 kg (beide 1.880 mm) en de HDC50-17 voor 50 kg met 1.700 mm. Bij de HDC25-18 draaien as 1, R2, het buigen en R1 elk ±190°. De herhaalnauwkeurigheid is ±0,05 mm. De robot weegt 215 kg en mag op de vloer, aan het plafond of aan de wand.
(02) What this means for your dress pack
Zware cobots worden vaak gebruikt voor palletiseren en zware handling naast mensen. Het pakket moet dan licht en glad blijven, zonder scherpe randen, en zonder terugtreksysteem dat uitsteekt. Omdat alle assen ±190° draaien, moet de lus bij elke as iets meer dan een halve slag aankunnen. Het slangadvies is Ø 29 mm, of groter als je grijper dikke vacuümslangen heeft.
(03) In practice
Test het pakket met de echte grijper in de uiterste standen van elke as.
Versions
Choose your version
Each model opens the configurator with your robot already selected. Payload and reach according to the manufacturer's data.
| Model | Payload | Reach | Class | Hose | Configure |
|---|---|---|---|---|---|
| HDC25-18 | 25 kg | 1.880 mm | Cobot | Ø 29 | Configure |
| HDC35-18 | 35 kg | 1.880 mm | Cobot | Ø 29 | Configure |
| HDC50-17 | 50 kg | 1.700 mm | Cobot | Ø 29 | Configure |
Not in the list?
Is your version not listed? In the configurator you enter the model yourself. Look for the type on the nameplate or in the robot's manual.
In this series
Payload 25, 35 en 50 kg. Reach 1.700 en 1.880 mm.
Longest arm
De HDC25-18 reaches 1,880 mm. With a long arm, the hose between axis 3 and the tool becomes longer; the retraction system on the upper arm keeps that length taut.
According to the manufacturer
What the HDC asks of the dress pack
Data from the manufacturer's documentation, and what it means for the hose, the clamps and the retraction system on this robot.
- Axes
- 6
- Range of axis 1
- ±190°
- Range of axis 4
- ±190°
- Range of axis 6
- ±190°
- Assembly
- floor, ceiling and wall
- Versions
- HDC25-18 (25 kg, 1.880 mm), HDC35-18 (35 kg, 1.880 mm), HDC50-17 (50 kg, 1.700 mm)
Source: manufacturer's documentation (hd-hyundairobotics.com). Always check the data for your own version.
Cables and hoses on the Hyundai Robotics HDC
- Collaboratieve robot met industriële prestaties
- Herhaalnauwkeurigheid ±0,05 mm (HDC25-18)
- Gewicht 215 kg (HDC25-18)
- (01)
Cobot: a light package along the arm
Op de Hyundai Robotics HDC loopt het pakket met lichte klemmen langs de segmenten van de arm naar het gereedschap, zonder terugtreksysteem. Zo blijft de arm vrij voor samenwerking en blijft de slang weg van mensen en werkstuk.
- (02)
Not just on the floor
Volgens de fabrikant mag de Hyundai Robotics HDC ook aan het plafond en de wand worden gemonteerd. Hangt of ligt de robot anders dan op de vloer, dan trekt de zwaartekracht de slang een andere kant op. Zet de klemmen dan dichter bij elkaar; vermeld de montage bij je aanvraag.
Dress pack configurator
Configure the dress pack for the HDC put together yourself
- 01
Your robot is already waiting
Choose your version; hose size, clamps and holders follow from the type.
- 02
You see the package on the robot
You see every choice reflected on the robot straight away. The parts list at the bottom calculates along.
- 03
PDF with drawing and parts list
Download your configuration with the drawing of your robot, your choices and the bill of materials.
- 04
Checked by the robot division
We calculate the configuration for your robot and tool and send a proposal with price.
Class Cobot, recommended hose Ø 29 mm.
Start the configuratorType not in the list? Enter the model yourself.
Hose size and parts
What goes on the HDC
The configurator classifies each version by payload. Per class the hose size, the solutions and the parts available in that size.
Cobot
Ø 29 mm3 versions from Hyundai Robotics HDC fall into the Cobot class (collaborative robots) with 25–50 kg payload. For these the configurator suggests a protective hose of Ø 29 mm.
HDC25-18 · HDC35-18 · HDC50-17
Solutions
- Cobot package
Available in Ø 29 mm
- Protective hose
- PARAB, PA 12, flexible · PURRB, PUR, extremely flexible
- Clamp
- nylon closurePASSB-29K
- Clamping jaws
- Clamp jaw set, holding
- End fixing (axis 6)
- Tool end fixing
Hyundai Robotics
Other series from Hyundai Robotics
Lighter: the HH with 10–20 kg payload and hose advice Ø 36 / Ø 52 mm.
Heavier: the HDP with 160 kg payload and hose advice Ø 70 mm.
In practice
Robot dress packs in practice
Featured project
Complete dress pack for a robot at Mifa Aluminium in Venlo
For a robot at Mifa Aluminium in Venlo, the robotics division of Wisman Techniek supplied a complete dress pack so the robot keeps running reliably.
- Customer
- Mifa Aluminium
- Location
- Venlo
- Sector
- Robotics & logistics
- Solution
- Robotics
- Cable package
- Cables and hoses for the tool
- Assembly
- Complete dress pack by the robotics division of Wisman Techniek
Frequently asked questions
Questions about a dress pack for this robot
Robot division
A dress pack that
fits your robot.
Send us your robot type and application. Our robot division puts the package together and checks it against your robot.
- Phone+31 88 002 3500
- E-mailverkoop@wisman-techniek.nl
- AvailableMon–Fri 08:30–17:00
11 specialists in Ruurlo
You speak directly to someone who knows.