Welke slangmaat past op een Franka-cobot?

Dat hangt af van het laadvermogen. De configurator stelt voor: Ø 29 mm voor de 2 uitvoeringen in de klasse Cobot (samenwerkende robots). Je kunt de maat in de configurator aanpassen als je kabelpakket dikker of dunner is.

Welke Franka-cobots staan in de configurator?

2 series met samen 2 uitvoeringen en 3 kg laadvermogen. Payload en bereik komen uit de gegevens van Franka. Kies je uitvoering en de configurator vult de klasse en de slangmaat in.

My version is not listed. What now?

Kies in de configurator Franka en vul het model zelf in, of vraag direct een voorstel aan. De robotdivisie stelt het pakket dan voor je samen en controleert het op je robot.

Dress pack per robot brand · Reiku

Dress pack for Franka-cobots

2 series and 2 versions from Franka are in the dress pack configurator, with 3 kg payload and 855 mm reach according to the manufacturer. Choose your robot and build the protective hose, clamps, holders and retraction system per axis. Our robot division checks the package on your robot and tool.

Configurator with Franka Prefer direct advice

FrankaHose advice Ø 29 mm

Series: 2
Versions: 2
Payload: 3 kg
Reach: 855 mm

Series

All series from Franka

Payload and reach per series according to the manufacturer. The hose size follows from the robot's class; you adjust it in the configurator.

Production 3
Payload
3 kg
Reach
855 mm
Hose
Ø 29
Research 3
Payload
3 kg
Reach
855 mm
Hose
Ø 29

Series	Versions	Payload	Reach	Class	Hose	View
Production 3	1	3 kg	855 mm	Cobot	Ø 29	Versions
Research 3	1	3 kg	855 mm	Cobot	Ø 29	Versions

Versions

All Franka-cobots at a glance

Model	Series	Payload	Reach	Axes	Hose	Configure
Production 3	Production 3	3 kg	855 mm	7	Ø 29	Configure
Research 3	Research 3	3 kg	855 mm	7	Ø 29	Configure

Dress pack configurator

Stel het dresspack voor je Franka-robot zelf samen

01
Your robot is already waiting
Choose your version; hose size, clamps and holders follow from the type.
02
You see the package on the robot
You see every choice reflected on the robot straight away. The parts list at the bottom calculates along.
03
PDF with drawing and parts list
Download your configuration with the drawing of your robot, your choices and the bill of materials.
04
Checked by the robot division
We calculate the configuration for your robot and tool and send a proposal with price.

Choose your type

Class Cobot, recommended hose Ø 29 mm.

Start the configurator

Type not in the list? Enter the model yourself.

Per class

Hose size and parts per class

The configurator classifies each robot by payload and suggests a hose size for it. Below, per class, what is available in that size.

Cobot
Ø 29 mm
2 versions from Franka fall into the Cobot class (collaborative robots) with 3 kg payload. For these the configurator suggests a protective hose of Ø 29 mm.
Production 3 · Research 3
Solutions
- Cobot package
Available in Ø 29 mm
Protective hose
PARAB, PA 12, flexible · PURRB, PUR, extremely flexible
Clamp
nylon closurePASSB-29K
Clamping jaws
Clamp jaw set, holding
End fixing (axis 6)
Tool end fixing

Featured

From light to heavy

Each button opens the configurator with that version already selected.

LightestProduction 33 kg
3 kg payload, 855 mm reach, class Cobot: hose advice Ø 29 mm.
Configure this robot

Assembly

What is in a dress pack?

A complete package runs from the base to the tool. With a base or upper-arm package, the parts that are not needed are left out. A cobot gets a light hose with clamps along the arm, without a retraction system.

01
Protective hose
Corrugated hose for the cables and hoses to the tool. Absorbs abrasion, kinking and spatter.
02
Rotary flange on axis 1
Holder on a rotating flange, so the package rotates 360° with the base of the robot.
03
Clamp on axis 3
Clamp with clamping jaws that guide, hold or let the hose slide through on the upper arm.
04
Retraction system
A spring that pulls excess hose back when the robot moves in, so no loop is left hanging.
05
Ball joint
Let the hose move along at an angle at the wrist, where axes 4 and 5 rotate.
06
Mounting on axis 6
End fixing at the tool. This is where the hose arrives at the welding torch, gripper or spray head.