PartsMy WismanTCall

Dress pack per robot brand · Reiku

Dress pack for Universal Robots cobots

12 series and 17 versions from Universal Robots are in the dress pack configurator, with 3–30 kg payload and 500–1,750 mm reach according to the manufacturer. Choose your robot and build the protective hose, clamps, holders and retraction system per axis. Our robot division checks the package on your robot and tool.

Configurator with Universal Robots Prefer direct advice
Universal RobotsHose advice Ø 29 mm
Series
12
Versions
17
Payload
3–30 kg
Reach
500–1.750 mm

Series

All series from Universal Robots

Payload and reach per series according to the manufacturer. The hose size follows from the robot's class; you adjust it in the configurator.

  • UR3e

    UR3e · UR3e-540

    Payload
    3 kg
    Reach
    500–540 mm
    Hose
    Ø 29
  • UR7e

    UR7e · UR7e-920

    Payload
    7,5 kg
    Reach
    850–920 mm
    Hose
    Ø 29
  • UR8 Long

    UR8 Long

    Payload
    8 kg
    Reach
    1.750 mm
    Hose
    Ø 29
  • UR10g

    UR10g-1750

    Payload
    8 kg
    Reach
    1.750 mm
    Hose
    Ø 29
  • UR12e

    UR12e · UR12e-1300

    Payload
    12,5 kg
    Reach
    1.300 mm
    Hose
    Ø 29
  • UR15

    UR15

    Payload
    15 kg
    Reach
    1.300 mm
    Hose
    Ø 29
  • UR16e

    UR16e

    Payload
    16 kg
    Reach
    900 mm
    Hose
    Ø 29
  • UR17g

    UR17g-1300

    Payload
    15 kg
    Reach
    1.300 mm
    Hose
    Ø 29
  • UR18

    UR18

    Payload
    18 kg
    Reach
    950 mm
    Hose
    Ø 29
  • UR18g

    UR18g-950

    Payload
    18 kg
    Reach
    950 mm
    Hose
    Ø 29
  • UR20

    UR20 · UR20-1750

    Payload
    20 kg
    Reach
    1.750 mm
    Hose
    Ø 29
  • UR30

    UR30 · UR30-1300

    Payload
    30 kg
    Reach
    1.300 mm
    Hose
    Ø 29

Versions

All Universal Robots cobots at a glance

ModelPayloadConfigure
UR3e3 kgConfigure
UR3e-5403 kgConfigure
UR7e7,5 kgConfigure
UR7e-9207,5 kgConfigure
UR8 Long8 kgConfigure
UR10g-17508 kgConfigure
UR12e12,5 kgConfigure
UR12e-130012,5 kgConfigure
UR1515 kgConfigure
UR17g-130015 kgConfigure
UR16e16 kgConfigure
UR1818 kgConfigure
UR18g-95018 kgConfigure
UR2020 kgConfigure
UR20-175020 kgConfigure
UR3030 kgConfigure
UR30-130030 kgConfigure

Per class

Hose size and parts per class

The configurator classifies each robot by payload and suggests a hose size for it. Below, per class, what is available in that size.

  • Cobot

    Ø 29 mm

    17 versions from Universal Robots fall into the Cobot class (collaborative robots) with 3–30 kg payload. For these the configurator suggests a protective hose of Ø 29 mm.

    UR3e · UR7e · UR8 Long · UR10g · UR12e · UR15 · UR17g · UR16e · UR18 · UR18g · UR20 · UR30

    Solutions

    • Cobot package

    Available in Ø 29 mm

    Protective hose
    PARAB, PA 12, flexible · PURRB, PUR, extremely flexible
    Clamp
    nylon closurePASSB-29K
    Clamping jaws
    Clamp jaw set, holding
    End fixing (axis 6)
    Tool end fixing

Featured

From light to heavy

Each button opens the configurator with that version already selected.

  • LightestUR3e3 kg

    3 kg payload, 500 mm reach, class Cobot: hose advice Ø 29 mm.

    Configure this robot
  • HeaviestUR3030 kg

    30 kg payload, 1,300 mm reach, class Cobot: hose advice Ø 29 mm.

    Configure this robot
  • Largest reachUR8 Long1.750 mm

    8 kg payload, 1,750 mm reach, class Cobot: hose advice Ø 29 mm.

    Configure this robot

Assembly

What is in a dress pack?

A complete package runs from the base to the tool. With a base or upper-arm package, the parts that are not needed are left out. A cobot gets a light hose with clamps along the arm, without a retraction system.

axis 1axis 2axis 3axis 4/5axis 6123456
  1. 01

    Protective hose

    Corrugated hose for the cables and hoses to the tool. Absorbs abrasion, kinking and spatter.

  2. 02

    Rotary flange on axis 1

    Holder on a rotating flange, so the package rotates 360° with the base of the robot.

  3. 03

    Clamp on axis 3

    Clamp with clamping jaws that guide, hold or let the hose slide through on the upper arm.

  4. 04

    Retraction system

    A spring that pulls excess hose back when the robot moves in, so no loop is left hanging.

  5. 05

    Ball joint

    Let the hose move along at an angle at the wrist, where axes 4 and 5 rotate.

  6. 06

    Mounting on axis 6

    End fixing at the tool. This is where the hose arrives at the welding torch, gripper or spray head.

Frequently asked questions

Questions about a dress pack for Universal Robots cobots

Other brands

Dress pack for another brand

All robots

Robot division

A dress pack that
fits your robot.

Send us your robot type and application. Our robot division puts the package together and checks it against your robot.

Useful reading

Request a quote
Call a specialist
Grego ErnstTieme ErnstOlaf OttenBas EgberinkDaan van Weeghel

11 specialists in Ruurlo
You speak directly to someone who knows.