Dress pack per robot brand · Reiku
Dress pack for FANUC robots
41 series and 109 versions from FANUC are in the dress pack configurator, with 3–2,300 kg payload and 550–4,683 mm reach according to the manufacturer. Choose your robot and build the protective hose, clamps, holders and retraction system per axis. Our robot division checks the package on your robot and tool.
Hose advice Ø 29 / Ø 36 / Ø 52 / Ø 70 mm- Series
- 41
- Versions
- 109
- Payload
- 3–2.300 kg
- Reach
- 550–4.683 mm
Series
All series from FANUC
Payload and reach per series according to the manufacturer. The hose size follows from the robot's class; you adjust it in the configurator.
- ARC Mate 50iD
ARC Mate 50iD/7L
- Payload
- 7 kg
- Reach
- 911 mm
- Hose
- Ø 36
- ARC Mate 100iD
ARC Mate 100iD/8L · ARC Mate 100iD/10L · ARC Mate 100iD · ARC Mate 100iD/16S
- Payload
- 8–16 kg
- Reach
- 1.103–2.032 mm
- Hose
- Ø 36 / Ø 52
- ARC Mate 120iD
ARC Mate 120iD/12L · ARC Mate 120iD · ARC Mate 120iD/35
- Payload
- 12–35 kg
- Reach
- 1.831–2.272 mm
- Hose
- Ø 36 / Ø 52
- CR-4iA
CR-4iA
- Payload
- 4 kg
- Reach
- 550 mm
- Hose
- Ø 29
- CR-7iA
CR-7iA · CR-7iA/L
- Payload
- 7 kg
- Reach
- 717–911 mm
- Hose
- Ø 29
- CR-14iA
CR-14iA/L
- Payload
- 14 kg
- Reach
- 911 mm
- Hose
- Ø 29
- CR-15iA
CR-15iA
- Payload
- 15 kg
- Reach
- 1.441 mm
- Hose
- Ø 29
- CR-35iB
CR-35iB
- Payload
- 50 kg
- Reach
- 1.643 mm
- Hose
- Ø 29
- CRX-3iA
CRX-3iA
- Payload
- 3 kg
- Reach
- 692 mm
- Hose
- Ø 29
- CRX-5iA
CRX-5iA
- Payload
- 5 kg
- Reach
- 994 mm
- Hose
- Ø 29
- CRX-10iA
CRX-10iA · CRX-10iA/L · CRX-10iA/L Paint
- Payload
- 10 kg
- Reach
- 1.249–1.418 mm
- Hose
- Ø 29
- CRX-20iA
CRX-20iA/L
- Payload
- 20 kg
- Reach
- 1.418 mm
- Hose
- Ø 29
- CRX-30iA
CRX-30iA
- Payload
- 30 kg
- Reach
- 1.756 mm
- Hose
- Ø 29
- ER-4iA
ER-4iA
- Payload
- 4 kg
- Reach
- 550 mm
- Hose
- Ø 36
- LR Mate
LR Mate/14-7D
- Payload
- 14 kg
- Reach
- 717 mm
- Hose
- Ø 52
- LR Mate 200iD
LR Mate 200iD/4S · LR Mate 200iD · LR Mate 200iD/7C · LR Mate 200iD/7H · LR Mate 200iD/7WP · LR Mate 200iD/7L · LR Mate 200iD/7LC · LR Mate 200iD/14L
- Payload
- 4–14 kg
- Reach
- 550–911 mm
- Hose
- Ø 36 / Ø 52
- LR-10iA
LR-10iA/10
- Payload
- 10 kg
- Reach
- 1.101 mm
- Hose
- Ø 36
- M-10iD
M-10iD/8L · M-10iD/10L · M-10iD/12 · M-10iD/16S
- Payload
- 8–16 kg
- Reach
- 1.103–2.032 mm
- Hose
- Ø 36 / Ø 52
- M-20iB
M-20iB/25 · M-20iB/25C · M-20iB/35S
- Payload
- 25–35 kg
- Reach
- 1.445–1.853 mm
- Hose
- Ø 52
- M-20iD
M-20iD/12L · M-20iD/25 · M-20iD/35
- Payload
- 12–35 kg
- Reach
- 1.831–2.272 mm
- Hose
- Ø 36 / Ø 52
- M-410
M-410/800F-32C
- Payload
- 800 kg
- Reach
- 3.203 mm
- Hose
- Ø 70
- M-410iB
M-410iB/140H · M-410iB/700
- Payload
- 140–700 kg
- Reach
- 2.850–3.143 mm
- Hose
- Ø 70
- M-410iC
M-410iC/110 · M-410iC/185 · M-410iC/315 · M-410iC/500
- Payload
- 110–500 kg
- Reach
- 2.403–3.143 mm
- Hose
- Ø 70
- M-710iC
M-710iC/12L · M-710iC/20M · M-710iC/20L · M-710iC/50S · M-710iC/50H
- Payload
- 12–50 kg
- Reach
- 1.359–3.123 mm
- Hose
- Ø 36 / Ø 52
- M-710iD
M-710iD/50M · M-710iD/70
- Payload
- 50–70 kg
- Reach
- 2.104–2.606 mm
- Hose
- Ø 52
- M-800iA
M-800iA/60
- Payload
- 60 kg
- Reach
- 2.040 mm
- Hose
- Ø 52
- M-810
M-810/190-20B · M-810/270-27B
- Payload
- 190–270 kg
- Reach
- 2.040–2.687 mm
- Hose
- Ø 70
- M-900iB
M-900iB/280 · M-900iB/280L · M-900iB/330L · M-900iB/360 · M-900iB/360E · M-900iB/400L · M-900iB/700 · M-900iB/700E
- Payload
- 280–700 kg
- Reach
- 2.655–3.704 mm
- Hose
- Ø 70
- M-950iA
M-950iA/500
- Payload
- 500 kg
- Reach
- 2.830 mm
- Hose
- Ø 70
- M-1000
M-1000/550F-46A
- Payload
- 550 kg
- Reach
- 4.601 mm
- Hose
- Ø 70
- M-1000iA
M-1000iA
- Payload
- 1.000 kg
- Reach
- 3.253 mm
- Hose
- Ø 70
- M-2000iA
M-2000iA/900L · M-2000iA/1200 · M-2000iA/1700L · M-2000iA/2300
- Payload
- 900–2.300 kg
- Reach
- 3.734–4.683 mm
- Hose
- Ø 70
- P-40iA
P-40iA
- Payload
- 5 kg
- Reach
- 1.300 mm
- Hose
- Ø 36
- P-55
P-55
- Payload
- 15 kg
- Reach
- 2.050 mm
- Hose
- Ø 52
- P-250iB
P-250iB/15
- Payload
- 15 kg
- Reach
- 2.800 mm
- Hose
- Ø 52
- P-350iA
P-350iA/45
- Payload
- 45 kg
- Reach
- 2.606 mm
- Hose
- Ø 52
- P-1000iA
P-1000iA
- Payload
- 15 kg
- Reach
- 3.396 mm
- Hose
- Ø 52
- R-1000iA
R-1000iA/80F · R-1000iA/80H · R-1000iA/100F · R-1000iA/120F-7B · R-1000iA/130F
- Payload
- 80–130 kg
- Reach
- 2.230 mm
- Hose
- Ø 70
- R-2000
R-2000/120R-39E · R-2000/125F-31E · R-2000/180F-27E · R-2000/210R-31E · R-2000/210F-31E · R-2000/225F-27E · R-2000/270R-31E · R-2000/300F-27E
- Payload
- 120–300 kg
- Reach
- 2.655–3.905 mm
- Hose
- Ø 70
- R-2000iC
R-2000iC/100P · R-2000iC/125L · R-2000iC/165F · R-2000iC/165R · R-2000iC/190S · R-2000iC/190U · R-2000iC/210WE · R-2000iC/210F · R-2000iC/210R · R-2000iC/210L · R-2000iC/220U · R-2000iC/240F · R-2000iC/270F · R-2000iC/270R
- Payload
- 100–270 kg
- Reach
- 2.040–3.540 mm
- Hose
- Ø 70
- R-2000iD
R-2000iD/100FH · R-2000iD/165FH · R-2000iD/210FH
- Payload
- 100–210 kg
- Reach
- 2.605 mm
- Hose
- Ø 70
Per class
Hose size and parts per class
The configurator classifies each robot by payload and suggests a hose size for it. Below, per class, what is available in that size.
Cobot
Ø 29 mm13 versions from FANUC fall into the Cobot class (collaborative robots) with 3–50 kg payload. For these the configurator suggests a protective hose of Ø 29 mm.
CRX-3iA · CR-4iA · CRX-5iA · CR-7iA · CRX-10iA · CR-14iA · CR-15iA · CRX-20iA · CRX-30iA · CR-35iB
Solutions
- Cobot package
Available in Ø 29 mm
- Protective hose
- PARAB, PA 12, flexible · PURRB, PUR, extremely flexible
- Clamp
- nylon closurePASSB-29K
- Clamping jaws
- Clamp jaw set, holding
- End fixing (axis 6)
- Tool end fixing
Compact
Ø 36 mm20 versions from FANUC fall into the Compact class (up to and including 12 kg) with 4–12 kg payload. For these the configurator suggests a protective hose of Ø 36 mm.
ER-4iA · LR Mate 200iD · P-40iA · ARC Mate 50iD · ARC Mate 100iD · M-10iD · LR-10iA · ARC Mate 120iD · M-20iD · M-710iC
Solutions
- Complete dress pack, axes 1–6
- Upper arm, axes 3–6
- Base, axes 1–3
Available in Ø 36 mm
- Protective hose
- PARAB, PA 12, flexible · PURRB, PUR, extremely flexible · PARRB, PA 12, rigid · LPRRB, PA 12, conductive
- Swivel flange 360° (axis 1)
- Swivel flange 360°PADFB-42
- Clamp
- nylon closure · screw closurePASSB-36K, PASSB-36S
- Clamping jaws
- Clamp jaw set, holding
- Retraction system
- fixed guidePOFHB-36/36
- Retraction system spring
- Retraction system spring
- Ball joint (axis 4/5)
- Ball joint, clamp jawPAKGB-36
- Ball joint protection ring
- Ball joint protection ringPAPRB-36
- End fixing (axis 6)
- Tool end fixing
Medium
Ø 52 mm22 versions from FANUC fall into the Medium class (more than 12 and less than 80 kg) with 14–70 kg payload. For these the configurator suggests a protective hose of Ø 52 mm.
LR Mate · LR Mate 200iD · P-55 · P-250iB · P-1000iA · ARC Mate 100iD · M-10iD · M-710iC · ARC Mate 120iD · M-20iB · M-20iD · P-350iA · M-710iD · M-800iA
Solutions
- Complete dress pack, axes 1–6
- Upper arm, axes 3–6
- Base, axes 1–3
Available in Ø 52 mm
- Protective hose
- PARAB, PA 12, flexible · PURRB, PUR, extremely flexible · PARRB, PA 12, rigid · LPRRB, PA 12, conductive
- Swivel flange 360° (axis 1)
- Swivel flange 360°
- Clamp
- nylon closure · stainless steel closure · screw closurePASSB-52K, PASSB-52M
- Clamping jaws
- Clamp jaw set, holding
- Retraction system
- fixed guide · spherical ±12°PAFKB-52
- Retraction system spring
- Retraction system spring
- Ball joint (axis 4/5)
- Ball joint, clamp jawPAKGB-52
- Ball joint protection ring
- Ball joint protection ringPAPRB-52
- End fixing (axis 6)
- Tool end fixing
Heavy
Ø 70 mm54 versions from FANUC fall into the Heavy class (80 kg and more) with 80–2,300 kg payload. For these the configurator suggests a protective hose of Ø 70 mm.
R-1000iA · R-2000iC · R-2000iD · M-410iC · R-2000 · M-410iB · M-810 · M-900iB · M-950iA · M-1000 · M-410 · M-2000iA · M-1000iA
Solutions
- Complete dress pack, axes 1–6
- Upper arm, axes 3–6
- Base, axes 1–3
Available in Ø 70 mm
- Protective hose
- PARAB, PA 12, flexible · PURRB, PUR, extremely flexible · PARRB, PA 12, rigid · LPRRB, PA 12, conductive
- Swivel flange 360° (axis 1)
- Swivel flange 360°
- Clamp
- nylon closure · stainless steel closure · screw closurePASSB-70K, PASSB-70M
- Clamping jaws
- Clamp jaw set, holding
- Retraction system
- fixed guide · tilting · spherical ±12°PAFHB-70, PAFTB-70, PAFKB-70
- Retraction system spring
- Retraction system spring
- Ball joint (axis 4/5)
- Ball joint, clamp jawPOKGB-70
- Ball joint protection ring
- Ball joint protection ring
- End fixing (axis 6)
- Tool end fixing
Featured
From light to heavy
Each button opens the configurator with that version already selected.
- LightestCRX-3iA3 kg
3 kg payload, 692 mm reach, class Cobot: hose advice Ø 29 mm.
Configure this robot - HeaviestM-2000iA/23002.300 kg
2,300 kg payload, 3,734 mm reach, class Heavy: hose advice Ø 70 mm.
Configure this robot - Largest reachM-2000iA/900L4.683 mm
900 kg payload, 4,683 mm reach, class Heavy: hose advice Ø 70 mm.
Configure this robot
Welding: 9 versions from FANUC are welding robots. For these the configurator switches on spatter heat protection by default.
Palletising: 7 versions are palletising robots, most with 4 axes. Discuss the hose routing with the robot division.
Painting: 6 versions are painting robots. The configurator has no separate option for this; the robot division coordinates the package with you.
Assembly
What is in a dress pack?
A complete package runs from the base to the tool. With a base or upper-arm package, the parts that are not needed are left out. A cobot gets a light hose with clamps along the arm, without a retraction system.
- 01
Protective hose
Corrugated hose for the cables and hoses to the tool. Absorbs abrasion, kinking and spatter.
- 02
Rotary flange on axis 1
Holder on a rotating flange, so the package rotates 360° with the base of the robot.
- 03
Clamp on axis 3
Clamp with clamping jaws that guide, hold or let the hose slide through on the upper arm.
- 04
Retraction system
A spring that pulls excess hose back when the robot moves in, so no loop is left hanging.
- 05
Ball joint
Let the hose move along at an angle at the wrist, where axes 4 and 5 rotate.
- 06
Mounting on axis 6
End fixing at the tool. This is where the hose arrives at the welding torch, gripper or spray head.
Frequently asked questions
Questions about a dress pack for FANUC robots
Other brands
Dress pack for another brand
Robot division
A dress pack that
fits your robot.
Send us your robot type and application. Our robot division puts the package together and checks it against your robot.
- Phone+31 88 002 3500
- E-mailverkoop@wisman-techniek.nl
- AvailableMon–Fri 08:30–17:00
11 specialists in Ruurlo
You speak directly to someone who knows.