PartsMy WismanTCall

Dress pack per robot brand · Reiku

Dress pack for Neura cobots

12 series and 12 versions from Neura Robotics are in the dress pack configurator, with 3–30 kg payload and 590–1,800 mm reach according to the manufacturer. Choose your robot and build the protective hose, clamps, holders and retraction system per axis. Our robot division checks the package on your robot and tool.

Configurator with Neura Robotics Prefer direct advice
Neura RoboticsHose advice Ø 29 mm
Series
12
Versions
12
Payload
3–30 kg
Reach
590–1.800 mm

Series

All series from Neura Robotics

Payload and reach per series according to the manufacturer. The hose size follows from the robot's class; you adjust it in the configurator.

  • LARA 3

    LARA 3

    Payload
    3 kg
    Reach
    590 mm
    Hose
    Ø 29
  • LARA 5

    LARA 5

    Payload
    5 kg
    Reach
    800 mm
    Hose
    Ø 29
  • LARA 8

    LARA 8

    Payload
    8 kg
    Reach
    1.300 mm
    Hose
    Ø 29
  • LARA 10

    LARA 10

    Payload
    10 kg
    Reach
    1.000 mm
    Hose
    Ø 29
  • LARA 15

    LARA 15

    Payload
    15 kg
    Reach
    1.600 mm
    Hose
    Ø 29
  • LARA 20

    LARA 20

    Payload
    20 kg
    Reach
    1.800 mm
    Hose
    Ø 29
  • LARA 25

    LARA 25

    Payload
    25 kg
    Reach
    1.800 mm
    Hose
    Ø 29
  • LARA 30

    LARA 30

    Payload
    30 kg
    Reach
    1.300 mm
    Hose
    Ø 29
  • LARA 30L

    LARA 30L

    Payload
    30 kg
    Reach
    1.800 mm
    Hose
    Ø 29
  • MAiRA L

    MAiRA L

    Payload
    11 kg
    Reach
    1.600 mm
    Hose
    Ø 29
  • MAiRA M

    MAiRA M

    Payload
    14 kg
    Reach
    1.400 mm
    Hose
    Ø 29
  • MAiRA S

    MAiRA S

    Payload
    18 kg
    Reach
    1.100 mm
    Hose
    Ø 29

Versions

All Neura cobots at a glance

ModelPayloadConfigure
LARA 33 kgConfigure
LARA 55 kgConfigure
LARA 88 kgConfigure
LARA 1010 kgConfigure
MAiRA L11 kgConfigure
MAiRA M14 kgConfigure
LARA 1515 kgConfigure
MAiRA S18 kgConfigure
LARA 2020 kgConfigure
LARA 2525 kgConfigure
LARA 3030 kgConfigure
LARA 30L30 kgConfigure

Per class

Hose size and parts per class

The configurator classifies each robot by payload and suggests a hose size for it. Below, per class, what is available in that size.

  • Cobot

    Ø 29 mm

    12 versions from Neura Robotics fall into the Cobot class (collaborative robots) with 3–30 kg payload. For these the configurator suggests a protective hose of Ø 29 mm.

    LARA 3 · LARA 5 · LARA 8 · LARA 10 · MAiRA L · MAiRA M · LARA 15 · MAiRA S · LARA 20 · LARA 25 · LARA 30 · LARA 30L

    Solutions

    • Cobot package

    Available in Ø 29 mm

    Protective hose
    PARAB, PA 12, flexible · PURRB, PUR, extremely flexible
    Clamp
    nylon closurePASSB-29K
    Clamping jaws
    Clamp jaw set, holding
    End fixing (axis 6)
    Tool end fixing

Featured

From light to heavy

Each button opens the configurator with that version already selected.

  • LightestLARA 33 kg

    3 kg payload, 590 mm reach, class Cobot: hose advice Ø 29 mm.

    Configure this robot
  • HeaviestLARA 3030 kg

    30 kg payload, 1,300 mm reach, class Cobot: hose advice Ø 29 mm.

    Configure this robot
  • Largest reachLARA 201.800 mm

    20 kg payload, 1,800 mm reach, class Cobot: hose advice Ø 29 mm.

    Configure this robot

Assembly

What is in a dress pack?

A complete package runs from the base to the tool. With a base or upper-arm package, the parts that are not needed are left out. A cobot gets a light hose with clamps along the arm, without a retraction system.

axis 1axis 2axis 3axis 4/5axis 6123456
  1. 01

    Protective hose

    Corrugated hose for the cables and hoses to the tool. Absorbs abrasion, kinking and spatter.

  2. 02

    Rotary flange on axis 1

    Holder on a rotating flange, so the package rotates 360° with the base of the robot.

  3. 03

    Clamp on axis 3

    Clamp with clamping jaws that guide, hold or let the hose slide through on the upper arm.

  4. 04

    Retraction system

    A spring that pulls excess hose back when the robot moves in, so no loop is left hanging.

  5. 05

    Ball joint

    Let the hose move along at an angle at the wrist, where axes 4 and 5 rotate.

  6. 06

    Mounting on axis 6

    End fixing at the tool. This is where the hose arrives at the welding torch, gripper or spray head.

Frequently asked questions

Questions about a dress pack for Neura cobots

Other brands

Dress pack for another brand

All robots

Robot division

A dress pack that
fits your robot.

Send us your robot type and application. Our robot division puts the package together and checks it against your robot.

Useful reading

Request a quote
Call a specialist
Grego ErnstTieme ErnstOlaf OttenBas EgberinkDaan van Weeghel

11 specialists in Ruurlo
You speak directly to someone who knows.